Entries for 2017

Bruce Suprenant, Technical Director, The Voice Newsletter December 2017 ACI 306R-88, “Guide to Cold Weather Concreting”, addressed multiple cycles of freezing and thawing by recommending that the concrete reach a compressive strength of 3500 psi prior to that exposure. ACI 201-77, “Guide to Durable Concrete”, also addressed the issue by stating: “Before being expos...

Read More

Bruce Suprenant, Technical Director, The Voice Newsletter November 2017 Ward Malisch answered this question about welded wire reinforcement (WWR) tolerances in the October 2010 VOICE. Since then the answer has changed. See both the 2010 and the 2017 answers below. QUESTION: What is the tolerance for deflection in 2.9x2.9, 2.0x2.0, and 1.4x1.4 welded-wire reinforcement (WWR) that is specified...

Read More

Bruce Suprenant, Technical Director, The Voice Newsletter October 2017 A lot has happened within CPC in the short time from May Committee Days in St. Louis to the September Annual Conference in Phoenix. What started in May got kicked around and discussed in depth in Phoenix: slab and polishing contractors working together on documents. At the Annual Conference, there were two roundtable discuss...

Read More

Bruce Suprenant, Technical Director, The Voice Newsletter September 2017 When rain falls on fresh concrete, concrete contractors get blamed for not checking the weather conditions and not planning the concrete placement to avoid rain. But tell that to concrete contractors in Seattle or Miami. The rainy season in Seattle includes six months, October through March, with15 days of rain or more, pl...

Read More

Bruce Suprenant, Technical Director, The Voice Newsletter June 2017 The ACI-ASCC 117 Tolerances Committee has just established a subcommittee to consider the effect of movements on tolerances. The current ACI 117-15 does consider the effect of some movements on tolerance measurement. It considers time, within 72 hours, in measuring flatness and levelness either by F-numbers or a 10-ft. straight...

Read More

Understanding ACI Document Jargon

Posted on March 01, 2017 in: Technical

Bruce Suprenant, Technical Director, The Voice Newsletter ACI’s Technical Activities Committee (TAC) forms technical committees and assigns each a mission. A technical committee mission identifies the knowledge area the committee is responsible for and is usually not document specific. Thus a single committee could develop both a Code or Standard and also a Guide. For instance, ACI Commit...

Read More

What’s Wrong with my Concrete

Posted on February 01, 2017 in: Technical

Bruce Suprenant, Technical Director, The Voice Newsletter February 2017 Yes, this is concrete at my house in Boulder, CO. Photos A and C are of the “new” concrete placed in 1992. Photo B is the “old” driveway placed in 1967. I bought the house in 1988 so I am responsible only for the “new” concrete. Well sort of. Let’s start with Photo A. There&rs...

Read More

Categories
Archives
ASCC Logo white letters on red cubes

The only association by and for all concrete contractors

Join Now

Contact Info

American Society of Concrete Contractors
10025 Office Center Avenue, Suite 120
Sappington, MO 63128
314-962-0210
ASCC Staff Login

Connect with ASCC

ASCC:

DCC:

CPC: