Technical

Bruce Suprenant, Technical Director, The Voice Newsletter March 2019 You might be aware that ACI has introduced a new code change proposal that would add a reference to ACI 117 Specification for Tolerances for Concrete Construction and Materials and ITG-7 Specification for Tolerances for Precast Concrete in the International Code Council (ICC) International Building Code (IBC). This is a new co...

Read More

Bruce Suprenant, Technical Director, The Voice Newsletter January/February 2019 The American Concrete Institute expects to publish “ACI 318-19: Building Code Requirements for Structural Concrete” in 2019. The new edition will be the first since the reorganized format was published in 2014 and will include new and updated code provisions along with updated color illustrations for cla...

Read More

Bruce Suprenant, Technical Director, The Voice Newsletter November 2018 ACI’s newest committee, 134, Constructability, has been providing contributions to a constructability column in ACI Concrete International. Members of 134 include Jim Cornell of JN Cornell Associates as chair, Bruce Suprenant, TAC contact, and Bev Garnant as a voting member, along with the following ASCC contractor me...

Read More

Bruce Suprenant, Technical Director, The Voice Newsletter July 2018 I hope you’re familiar with the ASCC on-line learning through the webinar series. ASCC offered 10 webinars in 2017 and has offered four in 2018. They are a great opportunity to learn from experienced presenters. While you might be aware of the ASCC webinars, ACI also offers online training through its ACI University. ACI ...

Read More

Bruce Suprenant, Technical Director, The Voice Newsletter June 2018 The concrete industry relies heavily on the results of concrete compressive strength tests to determine specification compliance or to allow construction activities such as form removal or post-tensioning to take place. While testing the strength of concrete is a simple test and controlled by an ASTM standard, the measured resu...

Read More

Bruce Suprenant, Technical Director, The Voice Newsletter April 2018 ACI-ASCC 117 joint tolerance committee met in Salt Lake City last month to discuss our favorite topic—how realistic are the tolerances? And of course, everyone has an opinion. The unfortunate problem is that there is no rationale presented for the tolerances in the document. The committee wants to change that problem wit...

Read More

Bruce Suprenant, Technical Director, The Voice Newsletter March 2018 Yes, every concrete contractor has felt the dreaded pain of back charges. Concrete contractors can face back charges that are unfair, including: No prior notice of defective work No time to investigate whether the work is defective No time allowed to fix the work No documentation that the cost of the back charges a...

Read More

Bruce Suprenant, Technical Director, The Voice Newsletter December 2017 ACI 306R-88, “Guide to Cold Weather Concreting”, addressed multiple cycles of freezing and thawing by recommending that the concrete reach a compressive strength of 3500 psi prior to that exposure. ACI 201-77, “Guide to Durable Concrete”, also addressed the issue by stating: “Before being expos...

Read More

Bruce Suprenant, Technical Director, The Voice Newsletter November 2017 Ward Malisch answered this question about welded wire reinforcement (WWR) tolerances in the October 2010 VOICE. Since then the answer has changed. See both the 2010 and the 2017 answers below. QUESTION: What is the tolerance for deflection in 2.9x2.9, 2.0x2.0, and 1.4x1.4 welded-wire reinforcement (WWR) that is specified...

Read More

Bruce Suprenant, Technical Director, The Voice Newsletter October 2017 A lot has happened within CPC in the short time from May Committee Days in St. Louis to the September Annual Conference in Phoenix. What started in May got kicked around and discussed in depth in Phoenix: slab and polishing contractors working together on documents. At the Annual Conference, there were two roundtable discuss...

Read More